Swan neck

To mount at the mast base

Small: Inner Ø 17 mm, Base 51 mm Ø, Height: 115 mm
Large: Inner Ø 36 mm, Base 78 mm Ø, Height: 150 mm
 

Swan neck small	order here
Swan neck large	order here

Through hull fittings

Through hull fittings
Stainless steel base, cable gland (Skin-Patent) is sea water resistant, almost 100% waterproof because of heat shrinkable rubber tube. The connector, lying below deck, can be pulled through the threaded joint. When mounting it the first time, the plug has to be removed, afterwards the screwing can stay at the cable. Delivered with cap.
Type A & B let PL plugs through.
Type F-H are suitable for radar cables and plugs.
 

	Cable-Ø	for Cable	Inner-Ø	external-Ø
Type A	4-7,5	RG58	19mm	60mm	order here
Type B	7-12,5	RG213	19mm	60mm	order here
Type F	12-16	Radar	35mm	70mm	order here
Type G	12-16	Radar	46mm	80mm	order here

all dimensions in mm

Cableport

Cable deck glands.
Stainless steel, polished surface, strong enough to walk on. 
Allows waterproof leading of all electrical connections through the deck. Connectors attached to the cables need not to be dismantled or cut off! The cockpit coaming integrated in the cabinet reliably prevents water penetrating in the yacht´s interior.
The flat design with rounded edges prevents the tangle of sheets, halyards and other ropes at the cableport.
- Cable gland for up to 6 cables, max 12 mm Ø
- Cable gland for plugs with max. 49 mm Ø
- Dimensions: L x W x H: 160 x 103 x 48 mm
 

Cableport

order here

back