Glomex ground plates

Especially for SSB transmitters on glass fiber yachts you should take care of a good ground. We recommend two rectangular ground plates below water and a flat ground strip to the antenna coupler.

For weather receivers a good groung can improve the distanc for a clear forecast. In this case we recommend a round ground plate.

	Ground plate round  diameter 128 mm (5''). surface 1,50 m² (17 ft²). weight 0,60 kg (1,40 lbs)
	Ground plate rectangular size 300 X 80 X 13 mm (12''x3''x½''). surface 3 m² (39,90 ft²). weight 1,65 kg (3,90 lbs).
	Copper ground strip Copper grounding strip for the secure conduction of disturbing potentials to the ground plate, very flexible, 0.5 mm thick, 50 mm wide, 1 coil 10 m long
	Flexible woven copper ribbon 22 mm wide x 2.5 mm thick, highly flexible, blank, flat, for device grounding and lightning protection

Glomex Synthesized spherical bronze Ground plates are the necessary interface between electric and electronic board devices and the dissipator element: water. 
The Bronze micro-spheres realize a huge contact surface with the dissipator element (water), given by the sum of the surfaces of all the bronze spheres; in fact, supported by the porosity of each ground plate, water penetrates into the plates touching the surface of all the spheres.
This kind of construction provides more efficiency than the smooth ground plates.
Glomex Ground Plates are provided with bolt and spacers done with the same material (bronze) used for the plates, in order to avoid electro-corrosion phenomena.
 
 

Ground plate round 1,5 m²	order here
Ground plate rectangular 3 m²	order here
Copper ground strip 10m coil	order here
Flexible woven copper ribbon per meter	order here

Zurück