LS 4100 fishfinder

Furuno LS-4100 Fishfinder

Basic display modes include single Low Frequency or High Frequency, Dual, Bottom-Lock Expansion, Bottom Zoom, A-scope, Marker Zoom and two Nav Data display modes. Choose from a variety of operating modes, including manual or two auto modes, fishing or cruising. The cruising mode uses a higher clutter refection setting than the fishing mode, making it useful to track the bottom while cruising.

The range can be changed manually or automatically. The LS4100 will redraw the entire echogram so that the contour can be shown seamlessly.

The LS4100 has the unique ability to be a handy navigational organizer when connected to appropriate sensors. It can display a variety of information including: water temperature, wind direction/speed, Lat/Lon, XTE and distance run in a graphical or text format. With the BBWGPS GPS/WAAS receiver connected, the “Mini-Navigator” feature is capable of storing up to 12 waypoints with a programmable name. Any waypoint can be selected as a destination. 

Standard Features 
- Waterproof, 5 Inch, Silver Bright Monochrome LCD Display 
- Dual Frequency - 50 and 200 kHz 
- Targets presented in up to 4 gray tones 
- Picture resolution of 240(H) x 320(V) pixels 
- 300 Watt RMS (2400 P-P) output power 
- Seven depth scales, from 0-10 to 0-640 feet 
- Depth offset to 1,500 feet, maximum depth scale of 3,000 feet 
- Automatic or Manual Depth Range and Gain Adjustment 
- A-Scope for rapid fish detection and species identification 
- White Line Mode for enhanced bottom fish detection 
- Audible and Visual, Temp, Speed, Fish or Bottom Alarm
- TLL output sends position, temp and depth to Furuno TLL capable plotters 

Multiple Display Modes
1. Normal, Low Frequency/High Frequency
2. Dual Frequency
3. Bottom Lock Expansion
4. Marker Zoom
5. Bottom Zoom
6. A-Scope
7. Two Customizable Navigation Data Display - Displaying digital and analog graphical info, including: Wind Speed/Direction, Ship's Speed, Steering Screens and more Speed and Temperature input via optional sensor or NMEA data 
Mini Navigator allows storage of up to 12 waypoints, with capability to navigate back to these points using the LS4100's XTE/Range and Bearing calculation and steering screens 
Two NMEA0183 ports - one bi-directional and one "listen-only" 

Power Requirements 
12 VDC, 6 Watts 

More information in the manual (1,3 MB pdf)

other sounders optional:

transdom mount depth (in standard shipping)

transdom mount depth, temp., speed

thru hull depth (shipform)

thru hull temp., speed (you need a y-cable)

y-cable for two transducers

thru hull bronze

shipping with:
LS4100 display, power-/datacable, transdom mount sounder depth, mountin bracket, displaycover
 

Furuno LS4100 with transom mount transducer	on request
Furuno LS4100 with thruhull transducer	on request

Zurück