LS 6100 Fishfinder

The LS6100 was developed for sport boats. It features a  6" high resolution LCD monitor for a detailed display of bottom and fishes. The resolution(240 x 320 pixels) is extraordinary in its class. It is delivered with a dual frequency transducer, 50 kHz and 200 kHz, with an output power of 300W rms (2400W peak-peak)

You can switch between several displays: Single frequency display 50 kHz, Single frequency displa 200 kHz, Dual frequency display, Bottom-Lock, Bottom-zoom, A-Scope, Marker Zoom and two Navigation displays.

There are multiple operation modes selectable: Manual, two x automatic, Fishing or trawling / cruising.

The depth range can be adjusted automatically or manually. Then the LS4100 draws a new picture for a seamless display. 

When a GPS or board instruments are connected, the LS6100 navigation  is unique. Then further information can be displayed, like water temperature, wind angle / -speed, longitude, latitude, cross track error and distance to waypoint as text or graphically displayed.
The "Mini Navigator" function features 12 waypoints with names. Each can be declared as a destination.

Features 
- waterproof, bright 6 " Monochrome LCD Display 
- Two frequencies - 50 and 200 kHz 
- Targets are shown in 4 grey levels. 
- Resolution 240(H) x 320(V) pixels 
- 300 Watt RMS (2400 P-P) transmitting power 
- 7 depth ranges, from 0-2 to 0-500m 
- Depth offset up to approx. 500 m
- Automatic or manual depth range and amplifier adjustment
- A-Scope function
- White Line Mode for a better display of fishes on the ground 
- Beep- and display alarm: temperature, speed, fishes or depth 
- TLL output sends data (e.g. position, temperature and depth) to Furuno TLL compatible plotters 

Multiple Display Modes
1. Normal, low frequency / high frequency
2. Both frequencies
3. Bottom Lock 
4. Marker Zoom
5. Bottom Zoom
6. A-Scope
7. Two adjustable displays, when NMEA sensors are connected.

Two NMEA0183 connections - one In-/Output and one only input

Voltage supply 
12 VDC, 7 Watt 

For further information, please look into the english data sheet (648 kB pdf)

Optional you can get other transducers:

Stern transducer for depth (Spare - included in delivery)

Stern transducer for depth, temp. speed  P66-A

Stern transducer for temp., speed (Y-cable is required)

Through hull transducer for depth

Through hull transducer for temp., speed (Y-cable is required)

Bronze Through hull transducer for depth, temp., speed

Y-cable for two transducers

NMEA Data cable 5m for GPS connection

Wind sensor RO Wind

Included in delivery:
LS6100 Display, Power cable, Stern transducer, mounting bracket, cover, german and english manual

Furuno LS6100 with stern transducer, depth

on request

back