The power distribution panels, series 200, combine user comfort through a simple design, and technical dependability. Each circuit is switched and protected by a thermic circuit breaker with its own rocker switch, (ETA 3130). It contains an integrated light diode that shows circuit status. In case of short circuit, the breaker switches automatically off and the light is out. Once the problem is corrected, the breaker can be manually pushed to on position. The circuit breaker has an intern mechanism that will not react (turn on) during a problem in circuitry, there by protecting circuits.
The measurements of the power distribution panels are coordinated to each other to allow the choice of vertical or horizontal mounting. Rocker switch circuit breakers with 10A are normally built in, but can be changed upon request to 6A, 16A, or 20A, without price change. Breakers are connected on the reversed side with spade terminals 6,3mm. Self adhesive labels are included.

During short circuit or overload, the light goes out and the switch clicks to the off position. Once the problem is corrected, the breaker can be again switched to the on position for continued use. The circuit breaker have an intern trip switch that cannot be inflenced during a problem by pressing on the rocker switch.

Control switches are for a comfortable system control. Labelling through a stick-on label.
- Switching from a remote control switch.
-  Voltmeter- switch over Batterie 1/2
-  Bilge pump (Auto-off-Manuel)
- Panel lighting on/off
- Monitoring switch (Tank 1/2)
- Instrument lighting

Individual circuits are labelled with self adhesive labels that are placed in the space of the required switch Night design. The instruments mounted on the panels individually illuminate for comfortable reading at night.

Power distribution panel with a navigation light display reveals the position of a light failure on board through a control light and an alarm. The acoustic alarm is acknowledgable by push button.

Power Distribution Panels 2-Pole
In two constructions power distribution can circuit switching 2-pole too.
In order to protect the power circuits on aluminium and steel vessels 2-pole contact breakers are fitted to ensure a complete galvanic isolation from the vessel's hull. The thermic-magnetic contact
breakers E-T-A 3130 are exchangeable and may be readily combined in power circuits. The contact breakers are available in the power ratings 6 A/10 A/16 A. Contact breakers with a rating of 10 A are fitted as standard.
 
 

	Philippi Power Distribution Panel STV 210 10 power circuits with thermic contact breakers 10 A, Dimensions W 105 x H 210 x D 70 mm order here
	Philippi Power Distribution Panel STV 207 7 power circuits with thermic contact breakers 10 A,  2 sockets 21mm. Dimensions W 105 x H 210 x D 70 mm order here
	Philippi Power Distribution Panel STV 204-SY 4 power circuits with thermic contact breakers 10 A,  Display "Sailing Boat" with electric monitor.  Dimensions: W 105 x H 210 x D 70 mm in 12V or 24V building order here
	Philippi Power Distribution Panel STV 206 2p 6 power circuits with thermic contact breakers 10 A, double pole (+ and - switch / breaker) Dimensions: W 105 x H 210 x D 70 mm order here
	Philippi Shore power unit LAE 235 Shore power unit with R/LS-circuit breaker, power light and a Schuko outlet. Connection with through lead clamps on reverse side. Dimensions: W 105 x H 210 x D 100 mm Along with power distribution panels of the series 200, there are shore power connection units available. They are connected on the reverse side with through lead clamps. The reverse side of the LAE 235 is constructed to be hands on safe. The panel is designed so that the reverse side is only accessable with the help of tools.  order here
	Philippi Blank plates STV 200 Leer 201 Blank plates Dimensions: W 105 x H 105 x D 2,5 mm on request

 

	Philippi power circuits STV 220 20 power circuits with thermic contact breakers 10A Dimensions: W 210 x H 210 x D 70 mm order here
	Philippi power circuits STV 214 14 power circuits with thermic contact breakers 10A, volt- and ammeter, 3 control switches for your decision Dimensions: W 210 x H 210 x D 70 mm in 12V or 24V building order here
	Philippi power circuits STV 208 8 power circuits with thermic contact breakers 10A Dimensions: W 210 x H 105 x D 70 mm order here
	Philippi power circuits STV 212 2p 12 power circuits with thermic contact breakers 10A, double pole Dimensions: W 210 x H 210 x D 70 mm order here
	Philippi power circuits STV 202 MY 2 power circuits with thermic contact breakers 10A and display power boat with electronic monitor Dimensions: W 210 x H 105 x D 70 mm in 12V or 24V building order here
	Philippi Blank plate STV 223 Panel for 3 instruments to choose from voltage, current, tank level. (sea  below). Panel can also be mounted vertical ! Dimensions: W 210 x H 105 x D 70 mm order here
	Philippi Display STV 200 SQB Water Philippi Display STV 200 SQB Fuel Instruments for water and fuel tanks to put in panels series 200 (sea above). Suitable for level sensors with resistance range 10-180 Ohm, please request extra Water display - order here Diesel display - order here Voltage 8-16 V - order here Voltage 16-32 V - order here Power 40A / 60A - order here
	Philippi Blank plate STV 200 Leer 200R Blank plate for car radio with DIN cut-out (183x55 mm).Dimensions: W 210 x H 105 x D 2,5 mm order here
	Philippi Blank plate STV 200 Leer 202 Blank plate Dimensions: W 210 x H 105 x D 2,5 mm order here

Philippi power circuit STV 230 20 power circuits with thermic contact breakers. 10A voltmeter with switch over, ammeter 0-40A and tank level instrument. Moving coil gauge, class 1,5 Display "Power boat" with elecronic monitor. Dimensions: W 420 x H 210 x D 70 mm  in 12V or 24V building order here

Philippi Labelling STV200 Serie Circuit labels for panel series STV 200 german - 9,00 € english - 9,00 € dutch - 9,00 €

Back