C-Series C70 / C80 / C120

The displays of the C-Series are the perfect central unit for all incoming navigation data. So you receive all important data in just one instrument.

With inputs for Pathfinder-Radar antennas, the digital Fischfinder module (DSM), SeaTalk, SeaTalk2 and NMEA 0183 in-/ouput, the multifunction displays will be the central unit for display and operation. You can recall instrument-, autopilot-, GPS-, electronic nav chart- and fishfinder data from just one instrument. An easy and intuitive menu operation enables you to change the display format. In this way data can be displayed simultaneously in single or split displays.

With the easy and intuitive menu operation the format of the display can be changed, either for data of one source, for multiple data shown simultaneously, or even a radar picture layed over the nav chart with MARPA function.

The C-Series Multifunction displays are equipped with high resolution, fully daylight viewable 256-colour-displays; that means they can be read even in bright sunlight. Three different versions are available:
 
 

	Raymarine C70	Raymarine C80	Raymarine C120
Display	16,5 cm (6,5“)	21,3 cm (8,4“)	30,7 cm (12“)
Resolution	VGA  480 x 640 pixels	VGA  480 x 640 pixels	SVGA 600 x 800 pixels
	Dimensions	Dimensions	Dimensions
Price	999,00 €	1999,00 €	2649,00 €
	order here	order here	order here

All multifunction displays can be flush mount or bracket mount.They are waterproof due to CFR46-standards (US-standard).

PCWaypoint Software for transfer waypoints between the PC and the C-Series with an empty CF card. Minimum System requirement Windows 98 or better, Microsoft Excel 2000 or better and CF card reader.

Upgrade the Raymarine C-Series to get a GPS-Chart Plotter Connection to an (optional) Raymarine Raystar 125 GPS-antenna. You get a high precision GPS-chart system. The 256-colour display works with up-to-date Navionics GoldCharts. The Satellite-Differential-GPS has a position accuracy of 3 m. The antenna is configurable for SeaTalk or NMEA 0183 output..

Raymarine C-Series extended to a radar system The new RD218 and RD242 in a new housing with improved technical details. Connection to an optional Pathfinder radar antenna: You get a high resolution radar-display with Auto GST ™ (fully automatic gain, anti clutter- und tune control).

New 2 kW Radom antenna, 5,1° horizontal and 25° vertical beam angle, range: 0,125 - 24 nautical miles, antenna diameter: 51 cm, weight: 9,5 kg, 15m cable
More information in the manual (600 kB pdf)

New 4 kW Radom antenna, 4,5° horizontal and 25° vertical beam angle, range: 0,125 - 45 nautical miles, antenna diameter: 61 cm, weight: 10 kg, 15m cable
More information in the manual (600 kB pdf)

4 kW Open array antenna, 1,85° horizontal beam angle, range: 0,125 - 72 nautical miles, length of rotating beam: 131 cm, weight: 30 kg, 15m cable
 

2kW Radom antenna RD218 51cm with 15m cable

18" Mast bracket for 2kW radom antenna

Radar mount self leveling backstay

4kW Radom antenna RD424 61cm with 15m cable

24" Mast bracket for 4kW radom antenna

4 kW Open array antenna 131cm with 15m cable

Raymarine C-Series with Radar Overlay on the nautical chart With the Gyro plus 2 compass a Radar/Chart-Overlay is possible to stabilize the two pictures. Build a system with an external Gyro-sensor including a Fluxgate-compass for Radar Overlay on the nautical chart. An angle error of the radar echo on the nautical chart results in a blurred display. For that reason we recommend this very fast and accurate sensor for the Radar overlay. It improves the steering performance of autopilots as well.

These instruments don´t have a hsb² interface. Raymarine slave instruments with picture transmission cannot be connected. Here you can find Chart Plotters and Radar systems  with a hsb² connection.

You get a variable navigation system fitted right to your needs. The system is extendable with a Radar, GPS, nautical charts and Fishfinders. 

For further information please look into the english operation manual (1,5 MB pdf) and the installation manual (1 MB pdf)

	Revolving console for the C70 display already prepared and precut. 31 x 30 x 22 cm (12.25" x 11" x 8.5") No. PP485
	Yoke console for the C70 display and a ST60 instrument or a VHF speaker already prepared and precut. 52 x 24 x 15 cm (20.25" x 9.5" x 6.125") Suitable for 22,5 / 25 mm pipes in a distance of 9,5"  (241,3mm) No. GP1041
	Yoke console for the C80 display already prepared and precut. 38 x 33 x 25cm (15.125" x 13" x 10") No. PP5051
	Yoke console for the C80 display already prepared and precut. 38 x 33 x 16 cm (15.125" x 13" x 6.125") Suitable for 22,5 / 25 mm pipes in a distance of 9,5"  (241,3mm) No. GP1051
	Revolving console for the C120 display already prepared and precut. 42 x 38 x 29 cm (16.625" x 15.125" x 11.25") No. PP5061
	Yoke console for the C120 display already prepared and precut. 43 x 33 x 17 cm (16.75" x 13" x 6.5") No. GP1061 - Suitable for 22,5 / 25 mm pipes in a distance of 9,5" (241,3mm) No. GP2061 - suitable for 25 mm pipes in a distance of 12" (304,8mm / Whitlock)

back